View 0-1462035-1_191710.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

The Best Relaytion
FT2 / FU2 Relay
FT2 / FU2 Relay
2 pole telecom/signal relay Through Hole Type (THT) Non - polarized. non-latching 1 coil
UL 508 UL 60950
File No. E111441
Features
- - - - - - - Telecom/signal relay (dry circuit, test access, ringing) Slim line 15 x 7.5 mm, 0.59 x 0.295 inch Switching current 2 A 2 changeover contacts (2 form C / DPDT) Bifurcated contacts High sensitive 24 V and 48 V coil versions Meets Bellcore GR 1089, FCC Part 68 and ITU-T K20 2500 V between coil and contacts CECC 61811-54-001 QC160504-CH0001 IEC/EN60950 IEC Ref. Cert. No. 2168
Typical applications:
- Communications equipment Linecard application - analog, ISDN, xDSL PABX Voice over IP Office and business equipment Measurement and control equipment Consumer electronics Set top boxes, HiFi Medical equipment
Insulation cateogry:
Supplementary insulation according IEC / EN 60950 and UL 1950 Working voltage Mains supply voltage Repetitive peak voltage: Pollution degree: Flammability classification: Maximum operating temperature:
- - - -
300 Vrms 250 Vrms
1500 V Internal: External: V-0 85 C 1 2
Options:
High Dielectric Version (HDV) with > 5000 V surge voltage between coil and contacts Suitable for 125 C ambient temperature
2
FT2 / FU2 Relay
Dimensions
FT2 THT FU2 SMT long terminals FU2 SMT short terminals
mm
L W H T T1 T2 Tw S 15 0.05 7.5 0.05 9.6 0.03 3.3 0.3 N/A 5.08 0.5 0.35 0.03
inch
0.590 0.002 0.295 0.002 0.377 0.001 0.129 0.011 N/A 0.200 0.020 0.013 0.001
mm
15 0.15 7.5 0.05 10 + 0.15 N/A 9.2 0.2 5.08 0.5 N/A
inch
0.590 0.002 0.295 0.002 0.393 + 0.006 N/A 0.362 0.008 0.200 0.020 N/A
mm
15 0.05 7.6 0.05 10 + 0.15 N/A 7.5 0.2 5.08 0.5 N/A
inch
0.590 0.002 0.296 0.002 0.393 + 0.006 N/A 0.295 0.008 0.200 0.020 N/A
FT2: THT Version
FU2: SMT Version
Long terminals (W) Short terminals (N)
Mounting hole layout
View onto the component side of the PCB
Solder pad layout
Long terminals
View onto the component side of the PCB Short terminals
Basic grid 2.54 mm
Terminal assignment
Relay - top view non-latching 1 coil release condition
3
FT2 / FU2 Relay
Coil Data (values at 23C)
Nominal voltage Unom Operate voltage range Minimum voltage UI Vdc Vdc Maximum voltage UII Vdc Vdc mW W / 10 % FT2 D34** FU2 D35** W FU2 D35** N 2.25 3.00 3.38 3.75 4.5 6.75 9.00 18.00 36.00 5.2 7.8 8.7 10.4 15.6 20.8 40.8 81.6 0.30 0.40 0.45 0.50 0.60 0.90 1.20 2.40 4.8 200 200 200 200 200 200 200 240 240 45 114 101 125 180 405 720 2400 9600 FT2 D34** FU2 D35** W FU2 D35** N 2.25 3.38 3.75 4.5 6.75 9.00 18.00 36.00 4.2 5.7 6.4 8.5 12.7 17.0 33.9 67.9 0.3 0.45 0.50 0.60 0.90 1.20 2.40 4.80 300 300 300 300 300 300 300 300 30 68 83 120 270 480 1920 7680 FT2 D34** 4.2 7.1 17.0 33.9 0.30 0.50 1.20 2.40 200 200 200 240 45 125 720 2400 THT SMT long term. SMT short term. 21 29 22 23 24 25 26 27 28 THT SMT long term. SMT short term. 01 02 03 04 05 06 07 08 THT HDV 91 93 96 97 Release voltage Minimum Nominal power consumption Resistance Coil number
Sensitive version
non-latching 1 coil 3 4 4.5 5 6 9 12 24 48
Standard version
non-latching 3 4.5 5 6 9 12 24 48
High dielectric version
non-latching 3 5 12 24 2.25 3.75 9.00 18.00
Further coil versions are available on request.
UI = UII =
Minimum voltage at 23 C after pre-energizing with nominal voltage without contact current Maximum continous voltage at 23
The operating voltage limits UI and UII depend on the temperature according to the formula: UI tamb = UII tamb = tamb UI tamb UII tamb kI, kII KI * UI and
23 C
KIl * UIl 23 C = Ambient temperature = Minimum voltage at ambient temperature, tamb = Maximum voltage at ambient temperature, tamb = Factors (dependent on temperature), see diagram
Ambient temperature tamb [C]
4
FT2 / FU2 Relay
Contact Data
Standard Version High Dielectric Version
Number of contacts and type Contact assembly Contact material Limiting continuous current at max. ambient temperature Maximum switching current Maximum swichting voltage Maximum switching capacity Thermoelectric potential Minimum switching voltage Initial contact resistance / measuring condition: 10 mA / 20 mV Electrical endurance at contact application 0 ( 12 V / 10 mA) at cable load open end Resistive load 125 Vdc / 0.24 A - 30 W 250 Vdc / 0.25 A - 62.5 VA 24 Vdc / 1.25 A - 30 W Mechanical endurance UL contact ratings
2 changeover contacts Bifurcated contacts Silver nickel, gold-covered Palladium-ruthenium, gold covered 2A 2A 2A 2A 220 Vdc 220 Vdc 250 Vac 250 Vdc 60 W, 62.5 VA 60 W, 62.5 VA < 10 mV 100 mV < 70 mW min. 2.5 x 106 operations min. 2.0 x 106 operations min. 1 x 105 operations min. 1 x 105 operations min. 1 x 105 operations typ. 108 operations 220 Vdc / 0.24 A - 60 W 125 Vdc / 0.24 A - 30 W 250 Vac / 0.25 A - 62.5 VA 125 Vac / 0.5 A - 62.5 VA 30 Vdc / 2 A - 60 W
Insulation resistance at 500 VDC Dielectric test voltage (1 min) between coil and contacts between adjacent contact sets between open contacts Surge voltage resistance according to Bellcore TR-NWT-001089 (2 / 10 ms) between coil and contacts between adjacent contact sets between open contacts according to FCC 68 (10 / 160 ms) between coil and contacts between adjacent contact sets between open contacts
Insulation
Standard Version > 10 W
9
High Dielectric Version > 109 W 3500 Vrms 1800 Vrms 1800 Vrms
1500 Vrms 1500 Vrms 1000 Vrms
2500 V 1500 V 1500 V 2500 V 1500 V 1500 V
5000 V 2500 V 2500 V 5000 V 2500 V 2500 V
High Frequency Data
Capacitance between coil and contacts between adjacent contact sets between open contacts RF Characteristics Isolation at 100 MHz / 900 MHz Insertion loss at 100 MHz / 900 MHz V.S.W.R. at 100 MHz / 900 MHz max. 4 pF max. 1 pF max. 1 pF
- 30.6 dB / - 13.7 dB - 0.02 dB / - 0.50 dB 1.02 / 1.27
5
FT2 / FU2 Relay
General data
Operate time at Unom typ. / max. Release time without diode in parallel, typ. / max. Release time with diode in parallel, typ. / max. Bounce time at closing contact, typ. / max. Maximum switching rate without load Ambient temperature Thermal resistance Maximum permissible coil temperature Vibration resistance (function) Shock resistance, half sinus, 11 ms Degree of protection / Environmental protection Needle flame test Mounting position Processing information Weight (mass) Resistance to soldering heat All data refers to 23 C unless otherwise specified.
3 ms / 5 ms 2 ms / 5 ms 4 ms / 5 ms 1 ms / 5 ms 50 operations/s -55 C ... +85 C < 165 K/W 125 C 10 G 10 to 1000 Hz 15 G (function) 500 G (damage) immersion cleanable, IP 67 / RT III / RT V application time 20 s, no burning or glowing any Ultrasonic cleaning is not recommended max. 3 g 260 C / 10 s
Recommended soldering conditions
Soldering conditions according CECC 00802
10 sec 20 - 40 sec 215 C Temperature C Temperature C 180 C 130 C
external preheating
Full line: typical Dotted line: process limits
max. 245 C 215 C 180 C 130 C
ca. 40 sec
100 C
forced cooling
Full line: typical Dotted line: process limits
Time (s)
Time (s)
Vapor Phase Soldering: Temperature/Time Profile (Lead Temperature)
Infrared Soldering: Temperature/Time Profile (Lead Temperature)
6
FT2 / FU 2 Relay
Packing
Tube for THT version - 50 relays per stick, 1000 relays per box Dimensions in mm
Tape and reel for SMT version with long terminals - 400 relays per reel, 2000 relays per box
1,75 0,1
4 0,1
1,5 0,1
2 0,1
A
Section A-A
Section B-B
11,5 0,1
24 0,3
B
B
3 max.
15,5 0,2
10 0,2
2,2
16 0,1
A
0,4
3 max.
ECR0915-2
10,5 0,1
Tape and reel for SMT version with short terminals - 500 relays per reel, 2500 relays per box
1,5 0,1
2 0,1
1,75 0,1
4 0,1
A
Section A-A
Section B-B
11,5 0,1
24 0,3
B
B
3 max.
15,5 0,2
8 0,2
3 max.
ECR0917-I
1,5 0,1
A
10,5 0,2
0,4
12 0,1
Reel dimension
7
FT2 / FU 2 Relay
Ordering Information
Relay Code
D3401 D3402 D3403 D3404 D3405 D3406 D3407 D3408 D3421 D3422 D3423 D3424 D3425 D3426 D3427 D3428 D3429 D3501N D3501W D3502N D3502W D3503N D3503W D3504N D3504W D3505N D3505W
Tyco Part Number
0-1462035-1 0-1462035-2 0-1462035-3 0-1462035-4 0-1462035-5 0-1462035-6 0-1462035-7 0-1462035-8 0-1462035-9 1-1462035-0 1-1462035-1 1-1462035-2 1-1462035-3 1-1462035-4 1-1462035-7 1-1462035-8 1-1462035-9 0-1462036-1 0-1462036-2 0-1462036-3 0-1462036-4 0-1462036-5 0-1462036-6 0-1462036-7 0-1462036-8 0-1462036-9 1-1462036-0
Relay Code
D3506N D3506W D3507N D3507W D3508N D3508W D3521N D3521W D3522N D3522W D3523N D3523W D3524N D3524W D3525N D3525W D3526N D3526W D3527N D3527W D3528N D3528W D3529N D3529W D3491 D3493 D3496 D3497
Tyco Part Number
1-1462036-1 1-1462036-2 1-1462036-3 1-1462036-4 1-1462036-5 1-1462036-6 1-1462036-7 1-1462036-8 1-1462036-9 2-1462036-0 2-1462036-1 2-1462036-2 2-1462036-3 2-1462036-4 2-1462036-5 2-1462036-6 2-1462036-7 2-1462036-8 2-1462036-9 9-1462036-1 9-1462036-3 9-1462036-5 3-1462036-0 3-1462036-1 2-1462035-0 1-1462035-5 2-1462035-4 2-1462035-5
8
FT2 / FU2 Relay
IM Relays
4th generation slim line - low profile polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The IM relay is CECC/IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height.
D2n Relays
2nd generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power consumption from 150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 20 x10 mm board space and 11,5 mm height.
P1 Relays
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 Relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version.
W11 Relays
FX Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FX2 is CECC/ IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.
Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.
Reed Relays
FT2 / FU2 Relays
High sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version.
3rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and surface mount type. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FT2/FU2 is CECC/IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
Cradle Relays
FP1 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP1 Relay is available as through hole type and capable to switch loads up to 30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV - 10 / 160 s). The FP2 is CECC/IECQ approved. Dimensions approx. 14 x 9 mm board space and 5 mm height.
Extremely reliable and mature relay family of 1st generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height.
Other Relays
MT2 / MT4
We offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 60 years old now, such as Card Relay SN (V23030 / V23031 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional.
2nd generation non polarized, non latching 2 c/o and 4 c/o telecom and signal relay with bifurcated contacts. Nominal voltage range from 4.5 ... 48 V, coil power consumption 150/200/300/400 and 550 mW, and 300 mW (MT4). Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s) for both and the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) the MT4 only. Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height, MT4 approx. 20 x15 mm board space and 11 mm height.
HF3 Relay
High performance low cost RF relay with excellent RF characteristics. Available with an impedance of 50 and 75 Ohm. Suitable for frequencies up to 3 GHz. Actually smallest RF relay available combining small size, excellent RF performance and SMD solderability. Available as non latching or latching relay with 1 or 2 coils and a nominal coil voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm.
9
Tyco Electronics AXICOM Ltd. Seestrasse 295 - P.O. Box 220 CH-8804 Au-Wadenswil / Switzerland Phone +41 1 782 9111 Fax +41 1 782 9080 E-mail: axicom@tycoelectronics.com
Tyco Electronics AMP GmbH Paulsternstrasse 26 D-13629 Berlin / Germany Phone +49 30 386 38260 Fax +49 30 386 38569 E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o. Komenskeho 821 CZ-541 01 Trutnov / Czech Republic E-mail: axicom@tycoelectronics.com
Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +1 800-522-6752
February 2003
Rev. 2.08

▲Up To Search▲

Price & Availability of 0-1462035-1

	To Download 0-1462035-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .